SLD Single-suction Multi-stage Centrifugal Pump
DL series pumps are vertical, single suction, multistage,sectional and centrifugal ones and used for transporting pure water and the liquids below 85 C and with the physical and chemical natures similar to water's.
Vertically mounted, of a compact structure, low noise, small occupied land etc, features and mainly used for the water supply and the centralized heat supply system in cities.
DL Vertical Multi-stage Centrifugal Pumps
SLG/SLGF are non-self-suction vertical multi-stage centrifugal pumps used for transporting
thin, clean, non-combustible non-explosive liquids containing no solid grains or fibers.
Liquid temperature: constant-temperature type -15~+70 C. hot-water type +70~120 C. Ambient temperature: max. +40 C. Elevation: max. 1000m
SLG Stainless Stell Vertical Multi-stage Pumps
MD type wearable centrifugal mine water pump is used to transport the clear water and the neutral liquid of pit water with solid grain not over 1.5%. Granularity < 0.5mm. The temperature of the liquid is not over 80 C. The pumps are suitable for water supply and drainage in mines, factories and cities.
MD Wearable Centrifugal Mine Water Pump
Model DG pump is a horizontal multi-stage centrifugal pump and suitable for transporting pure water (with the contained foreign matters' content less than 1% and graininess less than
0.1mm) and other liquids of both physical and chemical natures similar to those of pure water.
>Performance range of DG model middle and low pressure boiler water supply pump
3 Flow: 3.75~185m /h Corollary power: 4.0~400kW
Head: 69~684m Inlet diameter: 40~150mm
liquid temperature not over 105 C
>Performance range of DG model hypo-high-pressur e boiler water supply pump
3 Flow: 15~300m /h Corollary power: 75~1250kW
Head: 390~1050m Inlet diameter: 65~200mm
liquid temperature not over 160 C
DG Boiler Water Supply Pump
